Vacuum pressure transmitter -1 bar to 0 bar PT11-42-050-0/-1 bar-=-MG9-M1-CD4 is a mechanical device that measures the expansive force of a liquid or gaseous sample. Also known as a pressure transducer, this type of sensor is typically composed of a pressure sensitive surface area made of steel, silicon, or other materials depending upon the analyte's composition.

The pressure transmitters are used to reduce the flow rate or velocity of the city's water supply as it comes off the mountain or from the local rivers.

As we've already discussed, a Pressure Transmitter produces an analog electrical voltage or a current signal representing 0-100% of physical process pressure. A pressure switch has electrical contacts that open and close at a specific pressure.
Normal operating pressure range – high and low.
Maximum safe overpressure range (without bursting)
Frequency, and peaks of pressure pulses.

Disadvantages of Pressure Transducers

Provide only moderate accuracy in case of drifts.
Give delayed response to shocks and vibrations.
They're not reliable for high-temperature ranges and offer only moderate accuracy.
Highly sensitive to environmental conditions.

Most domestic plumbing appliances (taps, showers etc.) normally have a safe working limit for pressure of around 5 bar, sometimes with an ability to withstand 10 bar for very short periods. 2. Is 6 bar dangerous? Only if it causes an appliance / outlet to fail.

Vacuum pressure transmitter -1 bar PT11-42-050-0/-1 bar-=-MG9-M1-CD4:

- Model: PT11-42-050-0/-1 bar-=-MG9-M1-CD4
- Measuring range -1 bar to 0 bar
- Output 4-20mA
- Thread connection G1/4
- Accuracy 0.5% FS
- Origin MASS/India
- Warranty 12 months 
- Full CO/CQ certificates

Vacuum pressure transmitter -1 bar PT11-42-050-0/-1 bar-=-MG9-M1-CD4:

- Model: PT11-42-050-0/-1 bar-=-MG9-M1-CD4
- Measuring range -1 bar to 0 bar
- Output 0-10 V
- Thread connection G1/4
- Accuracy 0.5% FS
- Origin MASS/India
- 12-month warranty 
- Full CO/CQ certificates