WWW.SENSORS.VN
  • 0129.Jan.2016
    Friday
    02

    SENSORS VIETNAM- SENSING & CONTROL

    AIR DIFFERENTIAL PRESSURE TRANSMITTER, TEMPERATURE SENSOR, TEMPERATURE AND HUMIDITY SENSOR, PRESSURE SENSOR, CO GAS SENSOR, CO2 GAS SENSOR, SMOKE SENSOR, PROXIMITY SENSOR, CAPACITIVE SENSOR, PRESSURE SWITCH, WARNING LIGHT View
  • 0227.Dec.2025
    Saturday
    03

    TURBIDITY SENSOR RANGE 0-300 NTU

    TURBIDITY SENSOR, WATER TURBIDITY SENSOR, 300 NTU TURBIDITY SENSOR, LIQUID TURBIDITY SENSOR, WASTEWATER TURBIDITY SENSOR, METP-EX 0-300 NTU TURBIDITY SENSOR View
  • 0301.Feb.2016
    Monday
    04

    COMMUNICATION PROTOCOL

    Hardware and software standards that govern data transmission between computers. The term "protocol" is very generic and is used for hundreds of different communications methods. A protocol may define the packet structure of the data transmitted or the control commands that manage the session, or both View
  • 0418.Aug.2025
    Monday
    05

    CARBON MONOXIDE CONTROL PANEL

    CARBON MONOXIDE CONTROL PANEL, CARBON MONOXIDE CONTROL PANELS, CARBON MONOXIDE CONTROLLER, CARBON MONOXIDE WARNING SYSTEM, CARBON MONOXIDE CONTROL PANEL PROSENSE, CARBON MONOXIDE CONTROLLERS View
  • 0512.Jul.2025
    Saturday
    06

    DUCT CARBON DIOXIDE TRANSMITTER EMS KT-241

    DUCT CARBON DIOXIDE TRANSMITTER EMS KT-241 0-5000 PPM,DUCT CARBON DIOXIDE TRANSMITTER EMS KT-241 0-10000 PPM, DUCT CARBON DIOXIDE TRANSMITTER 4-20MA, DUCT CARBON DIOXIDE TRANSMITTER MODBUS RTU, DUCT CARBON DIOXIDE TRANSMITTER EMS 0-10V View
  • 0603.Feb.2016
    Wednesday
    07

    SENSORS VIETNAM- PROVIDE SERVICES MONITORING WIN TURBINE

    The complete condition monitoring solution for wind turbines by Sensors Vietnam – with extensive industry experience: The specialists at Gantner Instruments offer a tried and tested monitoring concept specifically tailored to wind turbines. Our unique solution was originally developed many years ago in close cooperation with wind turbine manufacturers, operators and service departments. View
  • 0731.Jan.2016
    Sunday
    08

    CATELOGY SOLENOID VALVE

    Solenoid valves control the flow of fluids, air, gases and other media in many types of systems and products. Each valve is in turn controlled by an electric current that passes through the solenoid. These electromechanically operated valves come in a broad range of configurations and materials suitable for countless applications. View
  • 0801.Feb.2016
    Monday
    09

    SENSORS VIETNAM -DISTRIBUTION SOLENOID VALVE

    Range of solenoid valve includes types and configurations for a wide variety of hydraulic, pneumatic, instrumentation, medical, refrigeration and aerospace applications. Solenoid valve solutions from US offer reliability, fast and safe switching and compact designs suitable for challenging environments. View
  • 0901.Feb.2016
    Monday
    9

    SENSORS VIETNAM- DISTRIBUTION COLOR SENSORS OF ASTECH- GERMANY

    CROMLAVIEW color sensors are based on the three-range procedure and they process colors according to human perception. Color-sensitive filters, which emulate the tristimulus function of the human eye, facilitate the correct recognition of color values. In terms of color information, opaque solid objects can be evaluated in the epi-illumination method, transparent liquids in the transmitted light method and self-luminous objects… View
  • 1001.Feb.2016
    Monday
    10

    SENSORS VIETNAM- SYNCHRONIZATION GENERATOR SERVICES

    In an alternating current electric power system, synchronization is the process of matching the speed and frequency of a generator or other source to a running network. An AC generator cannot deliver power to an electrical grid unless it is running at the same frequency as the network. If two segments of a grid are disconnected, they cannot exchange AC… View

CUSTOMER SERVICE

www.sensors.vn

Admin@sensors.vn

www.cambien.com.vn

Maker: LANBAO - CHINA.

Describes: LANBAO PDA-CR50DGRM laser displacement sensor offers ±0.1% F.S. accuracy, RS-485 Modbus and IP67 for position and size inspection in automation.

In automated production lines, monitoring the position, distance and displacement of components is essential for dimensional inspection and product quality control. The LANBAO PDA-CR50DGRM laser displacement sensor uses non-contact measurement technology, featuring a reference distance of 50 mm, a measurement range of ±15 mm, 10 µm resolution and 20 µm repeatability. The device is equipped with an OLED display, RS485 communication with Modbus support, PUSH-PULL/NPN/PNP switching outputs and an aluminum housing with an IP67 protection rating. These features make it suitable for position measurement and monitoring applications in industrial automation systems.

WHAT IS A LASER DISPLACEMENT SENSOR?

A laser displacement sensor is a device that uses a laser beam to determine the distance between the sensor and an object's surface. By detecting changes in this distance, the device can measure displacement, offset or changes in the position of the target without direct contact.

Unlike conventional photoelectric sensors, which only detect the presence or absence of an object, laser displacement sensors provide specific distance measurements. This makes them suitable for checking the height, thickness and flatness of components, as well as detecting positional changes on production lines.

With non contact measurement, high resolution and fast response times, laser displacement sensors are suitable for dimensional inspection, motion monitoring and quality control applications in industrial manufacturing.

OVERVIEW OF THE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR

The LANBAO PDA-CR50DGRM belongs to the PDA series of digital laser displacement sensors from LANBAO, a manufacturer based in China. The device is designed to measure distance and detect changes in an object's position for inspection and monitoring applications on production lines.

The PDA-CR50DGRM laser sensor has a reference distance of 50 mm and a measurement range of ±15 mm, corresponding to a measuring distance of 35 to 65 mm. It offers 10 µm resolution at a distance of 50 mm and 20 µm repeatability. Notably, its linearity is ±0.1% F.S., , supporting the detection and monitoring of small distance changes during measurement.

For connectivity, the sensor is equipped with an RS485 interface supporting the Modbus protocol, allowing measurement data to be transmitted to PLCs or control systems with compatible communication interfaces. It also features PUSH-PULL/NPN/PNP switching outputs, with selectable normally open (NO) or normally closed (NC) modes.

Another notable feature is its integrated OLED display and control panel on the sensor housing. Users can monitor measurement values, configure parameters, set the Slave address and baud rate, and adjust distance settings using the control buttons or through RS485 communication.

In addition to its measurement capabilities, the PDA-CR50DGRM features an aluminum housing and an IP67 protection rating, making it suitable for installation in industrial environments where dust and water may be present.

CONSTRUCTION OF THE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR

The LANBAO PDA-CR50DGRM laser displacement sensor features a compact block design measuring 65 × 51 × 23 mm, with an aluminum housing. It integrates the laser emitter and receiver, display, control panel and signal connection system.

Laser emitter: Uses a red laser source with a wavelength of 650 nm and Class 2 laser classification. The laser spot diameter is approximately Φ0.5 mm at a distance of 50 mm, concentrating the light on the measurement area of the target surface.

Signal receiver: Positioned separately from the laser emitter, the receiver captures reflected light from the target surface for distance measurement.

OLED display: Features a display area measuring 14 × 10.7 mm, allowing users to view measurement values and configuration information directly on the device.

Control panel: Integrated into the sensor housing, the control buttons allow users to configure distance settings, set output functions, perform Zero point adjustment and modify operating parameters.

Status indicators: Includes a green LED for power indication and a yellow LED for operating status and alarm indication, helping users monitor the device's operating condition.

Housing and connection cable: The sensor housing is made of aluminum, the lens cover uses PMMA material and the display panel is made of PC. With an IP67 protection rating, the device is suitable for industrial environments where dust and water may be present. The RS485 version uses a 2 m, 5 core PVC cable.

In addition, the product comes with installation accessories, including two 35 mm M4 screws, two nuts, two washers, a mounting bracket and an instruction manual.

OPERATING PRINCIPLE OF THE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR

The LANBAO PDA-CR50DGRM laser displacement sensor operates by projecting a laser beam onto an object's surface and receiving the reflected light to determine the distance. With separate laser emitting and receiving components, the device measures distance by detecting changes in the reflected light signal.

Specifically, the emitter projects a red laser beam onto the target surface. The reflected light is captured by the receiver. When the distance between the sensor and the target changes, the characteristics of the received light signal also change. The internal processor analyzes this signal to determine the corresponding distance.

Based on the measured distance, the sensor can detect displacement or positional differences relative to a reference position.

After processing, the measurement results are displayed on the OLED screen and transmitted to PLCs, controllers or monitoring systems through the RS485 interface supporting the Modbus protocol. This allows distance data to be received and processed for monitoring, inspection and control operations on production lines.

In addition to RS485 communication, the sensor supports PUSH-PULL/NPN/PNP switching outputs, which can be configured as normally open (NO) or normally closed (NC). Users can set detection thresholds through single point teaching and window teaching functions. The response time can also be selected from 2 ms, 16 ms or 40 ms, depending on application requirements.

APPLICATIONS OF THE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR

The LANBAO PDA-CR50DGRM laser displacement sensor is used in systems that require position, height and distance change detection without direct contact. It is suitable for displacement measurement and positional deviation inspection within the sensor's measuring range.

Typical applications include:

Electronic component manufacturing: Checking the height and mounting position of components on printed circuit boards (PCBs), connectors and small electronic parts.

Precision machining: Inspecting height differences between machined surfaces, detecting positional deviations and monitoring component assembly processes.

Automotive manufacturing: Checking the installation position, height and alignment of mechanical parts and components on production and assembly lines.

Machine building and industrial automation: Monitoring the displacement of machine mechanisms, checking workpiece positions and tracking the movement of machine components.

Industrial equipment manufacturing: Inspecting the position and alignment of components after assembly to help detect deviations during product quality control.

With non contact measurement, high linearity, RS485 communication with Modbus support and an IP67 protection rating, the sensor can be integrated into automatic measurement, monitoring and control systems in industrial manufacturing environments.

TECHNICAL SPECIFICATIONS OF THE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR

  • Model: PDA-CR50DGRM
  • Reference distance: 50 mm
  • Measurement range: ±15 mm
  • Measuring range (F.S.): 10 mm (35 to 65 mm)
  • Supply voltage: 10 to 30 VDC
  • Power consumption: ≤700 mW
  • Load current: 200 mA
  • Voltage drop: Less than 2.5 V
  • Light source: 650 nm red laser, Class 2
  • Laser spot diameter: Φ0.5 mm at 50 mm
  • Resolution: 10 µm at 50 mm
  • Linearity: ±0.1% F.S.
  • Repeatability: 20 µm
  • Temperature drift: ±0.08% F.S./°C
  • Output 1: RS485, supporting Modbus protocol
  • Output 2: PUSH-PULL/NPN/PNP, configurable as NO/NC
  • Distance configuration: Via control buttons or RS485
  • Response time: Selectable 2 ms / 16 ms / 40 ms
  • Display: OLED, 14 × 10.7 mm
  • Protection rating: IP67
  • Materials: Aluminum housing, PMMA lens cover and PC display panel
  • Dimensions: 65 × 51 × 23 mm
  • Connection cable: 2 m, 5 core PVC cable
  • Accessories: Mounting bracket, two M4 × 35 mm screws, two nuts, two washers and instruction manual
  • Brand: LANBAO

BUY THE GENUINE LANBAO PDA-CR50DGRM LASER DISPLACEMENT SENSOR FROM SENSORS VIETNAM

Sensors Vietnam is a distributor of LANBAO sensor products in Vietnam, providing sensor solutions for industrial measurement, monitoring, and automation applications.

When purchasing the LANBAO PDA-CR50DGRM laser displacement sensor from Sensors Vietnam, customers can be assured of genuine product origin and receive technical consultation to select equipment that meets the requirements of their specific applications.

For product inquiries or further information, please contact the Sensors Vietnam team for prompt assistance