DỊCH VỤ KHÁCH HÀNG
www.sensors.vn
Admin@sensors.vn
www.cambien.com.vn
Ngày 07/Jan/2020 lúc 08:31 PM - Xem: 805
Cảm biến nhiệt độ không tiếp xúc Pyrocube XS, Cảm biến nhiệt độ không tiếp xúc Calex với dòng cảm biến nhiệt độ hồng ngoại không tiếp xúc dùng để đo nhiệt độ khu vực rất nhỏ yêu cầu độ chính xác cao như Cảm biến nhiệt độ không tiếp xúc đo linh kiện trên bản mạch, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ linh kiện, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ giày dép, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ ắc qui, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ kim loại, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ nhựa, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ kính, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ tấm thép, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ rulo, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ metal, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ thép, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ sản phẩm, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ phi kim, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ chai lọ, Cảm biến nhiệt độ không tiếp xúc đo nhiệt độ bề mặt nóng chảy...
Cảm biến nhiệt độ không tiếp xúc Pyrocube XS có thể đo nhiệt độ vật nhỏ cỡ 0.7mm với độ chính xác cực cao, ổn định. Cảm biến nhiệt độ hồng ngoại xúc Pyrocube XS có dải đo từ 50-500 độ hoặc 100-500 độ C, outout 4-20mA chuẩn công nghiệp phù hợp với mọi ứng dụng trong nhà máy.
The PyroCube XS is a range of infrared temperature sensors with tightly focused optics that can measure very small areas.
Built-in LED sighting precisely illuminates the exact area being measured by the sensor.
Both models are available with or without a touch screen interface.
Measurement Specifications
Temperature Range XSA models: 50°C to 500°C
XSB models: 100°C to 500°C
Measurements at lower temperatures are possible with reduced stabilityAnalogue Output ScaleFactory set to:
4 mA = 0°C
20 mA = 500°C
Adjustable via optional touch screen module or RS232Response Time (95%)XSA models: 10 ms
XSB models: 50 ms
Adjustable up to 5 s via averaging functionMeasured Spot DiameterFrom 0.7 mm depending on model and measurement distance (see Field of View Diagrams below)Target SightingRed LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/off.Accuracy of MeasurementXSA models: ± 3°C or 1%, whichever is greater
XSB models: ± 5°CRepeatabilityXSA models: ± 1°C
XSB models: ± 2°CTemperature ResolutionXSA models: 0.5°C
XSB models: 1.5°CEmissivity SettingAdjustable, 0.3 to 1.0, via RS232C or optional touch screen interface
PM030 Specifications
Touch Screen Display Format2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlitConfigurable ParametersLanguage (English, Chinese, Japanese)
Temperature units °C/°F
Displayed temperature
LED sighting on/off
Password
Date & time (for data logging time stamps)
Peak hold period, decay level
Averaging period
Correction (gain/offset)
Emissivity setting (with teach function)
Reflected energy compensation (with teach function)
Output type
Output temperature range
Polarity on error
Alarm mode, levels, hysteresis
PM030 Data Logging Specifications
StorageMicroSD Card (optional), max. 32 GB, equal to 16 years of data at the fastest sample rate of 1 per secondData Logging Interval1 second to 1 day (configurable)Internal Clock Battery1 x BR 1225 3V (not included)Variables LoggedInstantaneous target temperature, hold temperature, alarm eventsFile format.csvConfigurable Parameters (Data Logging)Sample period
Number of samples
Scheduled startConfigurable Parameters (Alarm Logging)Log times when triggered, acknowledged, reset
Log data while triggered
Electrical Specifications
Outputs1 analogue output and 1 alarm outputAnalogue Output4-20 mA (this is the default factory setting on all models)
Output type can be changed via optional PM030 touch screen interface to a choice of:
0-20 mA
mV/°C
Voltage (range depends on model, see Ordering)Alarm Output1 open drain alarm output, rated 27 V DC, 0.2 ASupply Voltage5 to 27 V DC, 100 mA maxDigital CommunicationsRS232C Modbus RTU, non-isolatedOutput Cable Connection to SensorXSA models: Connector built into sensor
XSB models: Hardwired